Modular Plug/ RJ connector
Good quality and good service based on reasonable prices.
Included UTP/ FTP CAT5E, CAT6, CAT6A Modular Plug，
The most common is RJ45, which is connected to the network cable.
CAT6A/CAT7 RJ45 Connectors/Modular Plug
CAT6 RJ45 Connectors/Modular Plug
CAT5E RJ45 Connectors/Modular Plug
CAT3 RJ11 Connectors/Modular Plug
Contact us for a price
Speak To Modular Plug Specialist
Customize Your Modules Plug
Confirm The Type
First confirm key information including Plug Type(6P/2C,6P/4C,6P/6C,8P/8C,...) Connector Type（CAT5E,CAT6,CAT6A...）,Whether to block(shielded,unshielded)...
Recommed Price and Seveice
After confirming all the details, our sales experts will recommend the right Modules Plug that suit your needs, along with a quote and service.
What is the modular plug?
Modular plugs, or RJ (Registered Jack) connectors, are the most often used electrical connectors in LAN, telecommunications, and computer networking.
There are different categories of modular plugs, and each is made for dedicated purposes. The most frequently used ones are as follows:
- RJ45 (8P8C) is the most prevalent modular connector that computers adopt for Ethernet. It has eight positions and eight contacts (8P8C). This one has become the best-selling type in the market at present.
- RJ11 (6P4C/6P2C) is employed in telephone lines. RJ11 has six positions and contacts (6P4C or 6P2C). Any RJ45 connector is larger than it.
- RJ12 (6P6C), an RJ11 plug in size, but with six positions and six contacts (6P6C). It is also the standard type used in telephone connections but has also made it into the network applications.
ZION’S Typical types with picture
What type modular plug or RJ connector do the most people prefer?
One of the most commonly used options is RJ45. The four solid-colored and four lined-colored wires observed in the RJ45 connector enabled us to carry out the disinterest in the cable. RJ45 connectors can be of different types, and they are classified by their wiring standards, which are examples of such cables as Cat 5e, Cat 6, Cat 7.
Selecting the Correct RJ45 Connector
Selecting the right RJ45 (8P8C) connector for an Ethernet data cable (usually an extension with a three-prong plug) for your Ethernet data cable with the type and construction of the cable that should be run.
In order to secure the proper RJ45 connector for the Ethernet cable already linked to the network, here are the key points such as 1, 2, 3:
1 Having below the general data values of the Ethernet Cable (CAT8, CAT7, CAT6A, CAT6, CAT5E):
- OD of Out Jacket: The diameter of the Ethernet cable is determined in millimeters (mm).
- OD of Insulation: Find the diameter of the insulation.
- Conductor Type: Do you want solid or stranded conductors?
- OD of Conductor: Verify the copper conductor’s American Wire Gauge (AWG). This particular example is 23AWG-26AWG.
- Shielded or Unshielded: Inspect the cabling with foil braiding (Al/PET) or other types of coverings.
- Make sure you listen up for the red part because it is a clue to use it.
- The next image we can see is the accurately given RJ45 dimensions (diameter) in which the connectors made for the right or suitable cable.
2 Confirm key points of the RJ45 Connector:
- The Close End (Regular) plug or the Through (EZ) plug?
- Request to use both the regular plug and end insertable plug for different tools, please pay respect to the following options provided.
- What is the main difference between a single-piece and a two-piece RJ45 connectors?
- Gold Plating Thickness of RJ45 Plugs
General Household or Office Use: Imparts thickness between 0.5 to 6 microinches (μin) for gold plated connectors that are designed for the less intensive activities. This level is sufficient for devices that are not frequently subjected to plugging and unplugging cycles.
Commercial or Industrial Use: When there is a round-the-clock operation, like in a commercial or industrial environment, using devices made to withstand wear and tear, (which include thick coating of 15 to 30 μin) is a more preferable choice. This increase in thickness also has an effect on the durability of the device and its connection and will be observed as more robust.
Challenging Environments with Heavy Use: In equipment rooms, where frequent interactions with the devices such as plugging and unplugging is often seen, due to this, these gold plating can reach even 50 μin or more. This type of high level of plating is intended to assure the quality work and consistent, high structural connection.
In comparison to the conductive wire, the gold depends on its high current carrying capacity and the corrosion blocker. It is important to realize that the greater the amount of gold plated on the component surface, the higher the cost, and the degree of plating that is taken is generally ascribed to price restrictions first and foremost.
- We offer a plating range: our Copper alloy prong Pins can be plated with flash microinches to 50 microinches. The pre-gold layer is employed for substrates (the base material like brass or phosphor bronze), which enhances the smoothening of the surface and eradicates the pores in the gold layer.
3 Packing
- Your packing design can be tailored to your specifications.
Email us, Call us, Meeting online with us!
Tell us about your purchasing plans!
We specializing in designing, manufacturing communications infrastructure & equipment and providing customized services for our customers！
Email：sales@hello-signal.com
Give Us A Call：+86 15715730101